BZRFB - W F LATEX SATIN FINISH ENAMEL, 367

  • MSDS: BZRFB
  • Manufacturer: BENJAMIN MOORE AND CO
  • Product Name: W F LATEX SATIN FINISH ENAMEL, 367
  • National Stock Number: 8010-00N037742
Product Identification

Product ID:W F LATEX SATIN FINISH ENAMEL, 367
MSDS Date:06/25/1990
FSC:8010
NIIN:00N037742
MSDS Number: BZRFB

Responsible Party
BENJAMIN MOORE & CO
51 CHESTNUT RIDGE RD
MONTVALE, NJ 07645
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 201-573-9600

Cage: 09585

Contractor
BENJAMIN MOORE & CO
MONTVALE, NJ 07645 US

Telephone: 201-573-9600

Cage: 91950

Ingredients

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 19.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


CLAY (KAOLIN); (HYDROUS ALUM SILICATES)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 5.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:IRRITATION OF THE
RESPIRATORY TRACT. SKIN & EYE CONTACT:PRIMARY IRRITATION. INGESTION
OF LARGE AMOUNTS COULD CAUSE SERIOUS INJURY. CHRONIC:NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN
ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. GET MED HELP FOR ANY BRTHG DFCLTY.
EYE:FLUSH THORO W/WATER FOR @ LEAST 15 MINS. CALL PHYS. SKIN:WASH
WITH SOAP AND WATER. INGEST:DRINK 1-2 GLASSES OF WATER TO DILUTE.
DO NOT INDUCE VOMITING. CALL PHYSICIAN.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

Accidental Release

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS. AVOID
CONT W/EYES & PRLNGD CONT W/SKIN OR BRTHG OF SPRAY MIST OR SANDING
DUST. CLOSE CONTAINER AFTER EACH USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE
INTERNALLY.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIED FOR
PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED
OR CONFINED AREAS.
Ventilation:ADEQ TO MAINTAIN WORKING ATM BELOW TLV & LEL. MECH EXHAUST
MAY BE REQD IN CONFINED AREAS.
Protective Gloves:WATERPROOF GLVOES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:CLTHG ADEQ TO PROTECT SKIN. ANSI APPRVD
EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
% VOLAT:66.1-69.2.

Chemical Properties

Vapor Density:HVR/AIR
Spec Gravity:1.10-1.22
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

Stability

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND
CARBON MONOXIDE.

Disposal

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.